Features/Application
Excellent in adverse shop conditions, especially in high heat and humidity.
Long run durability even in high humidity conditions.
No need to use another emulsion when changing ink systems.
Forgiving to some degree of underexposure and overexposure.
Faster mixing eliminates one step from the emulsion mixing process.
Good for shops that print a diverse range of products and require excellent printed image quality, even for four-color process work.
Faster screen turnaround, less labor to reclaim.
Suitable for solvent based inks, UV inks.
Suitable for fine line graphic image, PCB patterns, nameplate and ceramic tiles using plastisol.
Specifications
Viscosity: Approx. 4600-4800 mPa･s, 25℃
Solid Contents: Approx. 39%
Packaging Standards: 1kg set, 5kgs set
Contact us for custom packaging.
Solvent Resistance Rating
| Solvents | Rating | Solvents | Rating |
| Water | Fair | Methylcellosolve | Good |
| Toluene | Excellent | Isophoron | Excellent |
| Acetone | Good | Ethyleneglycoldimethylether | Fair |
| Ethylacetate | Good | PGMEA | Good |
| Butylcellosolve | Excellent | Ispropyl alcohol | Excellent |
| N-methyl-pyrrolidone | Poor | Metylethylketone | Fair |
| Butylacetate | Excellent | Butylcarbitolacetate | Excellent |
| Cyclohexanone | Excellent | Terpineol | Excellent |
| Orange oil | Excellent | methanol | Fair |
※24 hours swelling/absorption test results.
Exposure Data
| Screen mesh, Color | E.O.M (μm) | 2Kw Metal Halide lamp |
| Polyester 120/cm (300/inch) w | 7-9 | 95-105 sec. |
| Polyester 110/cm (300/inch) w | 10-12 | 110-120 sec. |
| Polyester 100/cm (250/inch) w | 7-9 | 105-115 sec. |
| Polyester 90/cm (250/inch) w | 10-12 | 120-130 sec. |
| Polyester 77/cm (200/inch) w | 7-9 | 120-130 sec. |
| Polyester 80/cm (200/inch) w | 10-12 | 135-140 sec. |
※The above is for guideline purposes only, kindly to use a gray scale exposure calculator to identify optimal exposure time.
Instructions
Wash, degrease and dry screen mesh. Remove grease and foreign contaminants with MSP cleanser.
Dissolve attached Diazo powder with water amount for 10% of emulsion volume. Do not use warm water.
Pour Diazo solution into emulsion and mix it well. Prior to use, let mixed emulsions settle for one day. Or for immediate use, filter it with screen mesh 100/cm or higher.
Avoid excessive temperature for drying screens.
Coat emulsion slowly in order to prevent air bubbles.
Dry coated screen completely before exposure. Drying temperatures up to 40℃ (104℉).
Remarks
Keep the emulsion in a cool and UV light safe area.
Recommended to filter remaining emulsion with screen mesh before pouring it back into the container to remove any dust, foreign substances and air bubbles.
